> Create brand maps based on attribute data to provide a rich visual summary of large numeric tables

### Example

To load the `retailers` data go to _Data > Manage_, select `examples` from the `Load data of type` dropdown, and press the `Load` button. Then select the `retailers` dataset. The data set contains information on consumer evaluations for a set of retailers in the Chicago area on 7 attributes. In addition to attribute evaluations the dataset contains preference ratings on a scale from 1-9 for each retailer from two predefined consumer segments.

Select the `retailer` variable as the `Brand` attribute. This is simply a list of retailer names/labels. Then select the variables `good_value` through `cluttered` in the `Attributes` box. Choose the `segment1` and `segment2` variables in the `Preferences` box. After the settings have been changed click the `Estimate` button or press `CTRL-enter` (`CMD-enter` on mac) to generate results.

The variables in the `Attributes` box will be analyzed using factor analysis and the output is provided in the _Summary_ tab. We will start with a 2-dimensional solution. The first table shows the factor scores for the brands. In essence these are a weighted average of the original attribute data, where the weights are the factor loadings. In other words, the factor scores are (two) variables created by factor analysis to summarize the information contained in the original 7 attributes. The second table of numbers shows the factors loadings. These represent the correlations between the original attributes and the derived factor scores.

We are also provided with information on how much of the information contained in the attributes  is captured by the two derived factors. The first factor captures 56.4% and factor two captures 42% of the variation in the original data. Together the factors cover 98.4% of the variation, i.e., the information loss from reducing the dimensionality of the data from 7 attributes to two factors is only 1.6%. Adding a third factor will increase the captured variance only slightly but will make the interpretation of the map(s) more difficult. Therefore we will focus on the 2-dimension brand map.

The preference correlations indicate how strongly the preference scores provided by respondents are linked to the uncovered factor scores. The preferences for `Segment 2` seems very strongly positively correlated with factor 2 so we might expect to see the preference arrow for this segment pointing almost straight up. The communalities indicate how much of the variation in the segment preferences can be explained by the two factors. The number are excellent (i.e., 97.5% for Segment 1 and 91.5% for Segment 2). We can infer from these numbers that the attributes selected in the study reflect consumers preferences well, a key feature of useful brand mapping research. Choosing attributes that are not linked to customer preferences leads to brand maps that will be of limited value to a manager.

The final table shows the attribute communalities. These numbers indicate how much of the variation in the attributes data can be explained by the two factors. The cumulative variance mentioned earlier is an overall measure across attributes. However, we are also interested to see if each of the individual attributes is well represented by the two factors. The numbers in this example are excellent across the board (i.e., all over 90%).

<p align="center"><img src="https://radiant-rstats.github.io/docs/multivariate/figures_multivariate//prmap_summary.png"></p>

It is useful to start with a map showing only brand locations. Create the map in the _Plot_ tab by checking the ‘Brands’ box. The graph is a scatter plot of the scores for factor 1 (the horizontal axis) and factor 2 (the vertical axis). In other words the scores for a brand on factor 1 and factor 2 are the coordinates for that brand in the map. The retailer names are used to label each point.

<p align="center"><img src="https://radiant-rstats.github.io/docs/multivariate/figures_multivariate//prmap_plot_brands.png"></p>

We can create a brand map with both the brand locations (again, using the factor scores) and the attribute arrows (using the factor loadings) by checking both the 'Brands' and 'Attributes' boxes. The orientation of the arrows is determined by the degree of correlation between attribute and factors, i.e., the factor loadings. The attribute `Service` has a strong positive loading on factor 1 and so it points, mostly, in the direction in which factor 1 increases in value (i.e., to the right). Since the correlation of `Service` with factor 2 is, slightly, positive the arrow points up rather than down. In contrast, the attribute `Convenience` has a strong positive loading on factor 2 and so it points, mostly, in the direction in which factor 2 increases in value (i.e., up). Since it's correlation with factor 1 is, slightly, positive the arrow points to the right rather than to the left. The length of the arrows is proportional to the communalities reported in the _Summary_ tab. The higher the communality, the longer the arrow. If an attribute is not well summarized in the derived factors it's communality will be low and the arrow in the brand map for that attribute will be short.

<p align="center"><img src="https://radiant-rstats.github.io/docs/multivariate/figures_multivariate//prmap_plot_brands_attr.png"></p>

Finally, we can add the preference information to the map by checking the 'Preferences' box. The orientation of the segment preference arrows is determined by the correlation between the factor scores and the preference scores. Since the preferences for the retailers expressed by respondents assigned to segment 2 are highly correlated with factor 2 the arrow points almost straight up. The negative correlations of the preference scores for segment 1 with both factor 1 and factor 2 ensure the arrow will point down and to the left.

<p align="center"><img src="https://radiant-rstats.github.io/docs/multivariate/figures_multivariate//prmap_plot_all.png"></p>

In the plot we see that Whole foods and Cub foods are perceived as more comparable on the attributes for which we have data than, for example, Whole foods and Wal-Mart. From the plot a manager might conclude that the brands that are closest together in the map are perceived as close substitutes and, hence, close competitors in the minds of consumers.

An important limitation of a map without attribute information, e.g., based on (dis)similarity data, is that it is difficult to interpret why brands are located close together or far apart. By adding the attribute arrows to the map, as shown above, our understanding of the brand positions in the maps is significantly enhanced. For example, Jewel and Dominick's are positioned higher in the map because they are perceived to offer consumers higher levels of convenience. Similarly, Cub foods, and particularly Whole foods, offer higher levels of customer service and quality products. We can also infer which available attributes are most strongly linked to consumer preferences. Segment 2 is primarily concerned with Convenience which may explain the higher preference scores for Jewel and Dominick's. Similarly, Segment 2 cares most about Good value and very little for Assortment. This segment prefers to shop at Treasure Island and Wal-Mart.

## Including categorical variables

<!-- Attribute-based perceptual maps are calculated using Principal Components Analysis (PCA). The correlation matrix used as input for PCA can be calculated for variables of type `numeric`, `integer`, `date`, and `factor`. When variables of type factor are included the `Adjust for categorical variables` box should be checked. When correlations are estimated with adjustment, variables that are of type `factor` will be treated as (ordinal) categorical variables and all other variables will be treated as continuous. -->

Attribute-based perceptual maps are calculated using Principal Components Analysis (PCA). The correlation matrix used as input for PCA can currently be calculated only for variables of type `numeric`, `integer`, and `date`. Preference information, however, can be of type `numeric`, `integer`, `date`, and `factor`. When preference variables of type {factor} are included, correlations between the factor scores and preference data will be calculated using `polycor::hetcor`. The {factor} variables will be treated as (ordinal) categorical variables and all other variables will be treated as continuous.

### Report > Rmd

Add code to <a href="https://radiant-rstats.github.io/docs/data/report_rmd.html" target="_blank">_Report > Rmd_</a> to (re)create the analysis by clicking the <i title="report results" class="fa fa-edit"></i> icon on the bottom left of your screen or by pressing `ALT-enter` on your keyboard. 

### R-functions

For an overview of related R-functions used by Radiant to generate brand maps see <a href = "https://radiant-rstats.github.io/radiant.multivariate/reference/index.html#section-multivariate-maps" target="_blank">_Multivariate > Maps_</a>.

The key functions used in the `prmap` tool are `cor` and `cov` from the `stats` package and `principal` from the `psych` package. 
